Martingale Dog Collar
Hardware Sets
Metal martingale hardware sets for making specialty collars for hounds and other dogs that can easily slip their collar.
Shipping included on all USA orders.
Additional charges due on International orders. See FAQ.
All parts are measured and listed as to the size of the webbing they will accommodate: 5/8″ part will fit 5/8″ webbing.
Martingale Dog Collar Hardware Sets
3/8″ Martingale Collar Hardware Set
Each set consists of three 3/8″ nickel metal slides with openings approximately 1/8″ wide and two 3/8″ nickel welded D rings. For use with 3/8″ wide webbing.
1/2″ Martingale Collar Hardware Set
Each set consists of three 1/2″ nickel metal slides with openings approximately 3/16″ wide and two 1/2″ nickel cast D rings.
For use with 1/2″ wide webbing.
5/8″ Martingale Collar Hardware Set
Each set consists of three 5/8″ nickel metal slides with openings approximately 3/16″ wide and two 5/8″ nickel cast D rings.
For use with 5/8″ wide webbing.
3/4″ Martingale Collar Hardware Set
1″ Martingale
Collar Hardware Set
Each set consists of three 3/4″ nickel metal slides with openings approximately 3/16″ wide and two 3/4″ nickel cast D rings.
For use with 3/4″ wide webbing.
Each set consists of three 1″ nickel metal slides with openings approximately 1/4″ wide and two 1″ nickel cast D rings.
For use with 1″ wide webbing.
1.5″ and 2″ Martingale Hardware Sets
*The D ring in these sets are light weight and lighltly welded. They are not suitable for heavy applications such as restraining strong animals and must be tested in your application to determine if appropriate.
The D ring is the same in both light and heavy 1.5″ and 2″ sets.
The difference between the sets are the slides. The heavier versions have wider opening slides to accommodate heavier straps.
1.5″ Light
Martingale Collar Hardware Set
1.5″ Heavy Martingale Collar Hardware Set
Each set consists of three 1.5″ light nickel metal slides with openings approximately 1/4″ wide and two 1.5″ light* nickel D rings.
For use with 1.5″ wide webbing.
Each set consists of three 1.5″ heavy nickel metal slides with openings approximately 5/16″ wide and two 1.5″ light* nickel D rings.
For use with 1.5″ wide webbing.
2″ Light Martingale Collar Hardware Set
2″ Heavy Martingale Collar Hardware Set
Each set consists of three 2″ light nickel metal slides with openings approximately 1/4″ wide and two 2″ light* nickel D rings.
For use with 2″ wide webbing.
Each set consists of three 2″ heavy nickel metal slides with openings approximately 5/16″ wide and two 2″ light* nickel D rings.
For use with 2″ wide webbing.
Each consumer is responsible for determining the suitability of these products for their individual situation. Consumer accepts all responsibility by purchasing and using these products.